Patch Kits are designed for at-home, quick fix applications. Holes and tears greater than 3” should NOT be patched. If holes and tears are greater than 3”, look at other repair options. Extend the life of your solid HyPerLite safety cover with this easy to use kit.
Features:
- Contains 8.5” X 11” self-adhesive patch kit
- Can be cut into multiple smaller patches
- Can be used for a HyPerLite safety cover
Instructions:
- Thoroughly clean area on both sides of the cover that will be patched. It is important to make sure the area is completely dry before applying the patch
- Trim any loose threads around the hole so the patch will lay flat
- Cut the patch so it will overlap the hole by 1” all the way around and round off all corners on the patch
- Lay cover on a flat solid surface
- Remove backing from self-adhesive patch and apply to the cover by pressing firmly and work across to remove wrinkles and air pockets
- For best results, apply a second patch to the backside of the cover by repeating the steps above
